怎樣選擇機床墊鐵

時間：2016/1/25 9:42:07 瀏覽量：518

機床墊鐵的選用方法：

按設備原有支承數，參照上表中每個墊鐵最大承載量選用所需型號。例如C620車床，機床重量2280公斤，機床支承六點，則2280/6=363kg，若選用SV78-100型已超載，故應選用SV78-125型為適合。

作用方法：

安裝機床的地甚平面可以量混凝土，也可以是木質的，要求平整結實。
安裝時，旋出調節螺桿，將機床置于墊鐵的負荷盤上，然后從上面旋入螺桿。
調整機床導軌水平，順時針旋動時機床上升，反時針時機床下降，調好后壓緊螺母。
在機床的安裝區域內，如果地基平面的高度差超過本產品的調節范圍時，可以在機床與負荷盤間增加墊片。
機床防震墊鐵橡膠有蠕變現象，待經14天趨向穩定，故要求機床使用14天后再調整一次水平

適用范圍：

金屬加工機床，緞壓機床、紡織、印刷機械、食品加工機、橡膠機械、電線、電纜機械、發電機及重型設備。

Machine mattress iron selection method:

According to the original bearing number of the equipment, refer to the maximum bearing capacity of each horn in the above table and select the required model. For example, the C620 lathe, the weight of the machine tool is 2280 kg, and the machine tool supports six points, then 2280/6=363kg. If the SV78-100 type is overloaded, the SV78-125 type should be used.

Method of action:

The ground plane of the installation machine can be concrete or wooden, and it needs to be flat and firm.

When installing, unscrew the adjusting screw, place the machine on the load plate of the horn, and screw it into the screw from above.

Adjust the level of the machine guide rail. When the machine is rotated clockwise, the machine tool rises. When the machine is counterclockwise, the machine tool is lowered. After adjusting, press the nut.

In the installation area ofthe machine tool, if the height difference of the foundation plane exceeds the adjustment range of the product, a gasket can be added between the machine tool and the load plate.

The shockproof horn rubber of the machine tool has creep phenomenon. After 14 days, it tends to be stable. Therefore, the machine is required to adjust the level after 14 days.

Scope of application:

Metalworking machine tools, satin presses, textiles, printing machinery, food processing machines, rubber machinery, wire and cable machinery, generators and heavy equipment.

Company name: botou zhuoyuan mechanical equipment manufacturing co.,LTD
Registered address: jiaohe development zone, botou city, hebei province
Fax number: 0317-8031093
Contact information: 15369812793 (WeChat with the same number)  liansheng chu
Postcode: 062151
Enterprise email:1358827475@qq.com
Account Opening Bank: Botou Branch of Bank of China
Account number: 100399943203
Agricultural bank account number: 6228481739059615270
http://zhuoyuanjixie.com