鑄鐵平臺平板的安裝維護注意事項

時間：2015/12/26 11:14:01 瀏覽量：487 1、鑄鐵平臺不用時要及時將工作面洗凈，然后涂上一層防銹油，并用防銹紙蓋上，用鑄鐵平板的外包裝將鑄鐵平板蓋好，以防止平時不注意造成對鑄鐵平板工作面的損傷。
2、鑄鐵平臺應安裝在通風、干燥的環境中，并遠離熱源、有腐蝕的氣體、有腐蝕的液體。
3、鑄鐵平臺按國家標準實行定期周檢，檢定周期根據具體情況可為6-12個月。
4、為了防止鑄鐵平板發生的變形，在吊裝鑄鐵平板時，要用四根同樣長度的鋼絲繩同時掛住鑄鐵平板上得四個起重孔，將鑄鐵平板平穩吊裝在運輸工具上。
5、將鑄鐵平臺支承點墊好、墊平，保證每個支撐點受力均勻，保證整個鑄鐵平板平穩。
6、鑄鐵平臺安裝時將鑄鐵平板的各個支撐點用調整墊鐵墊好、墊實，由專業技術人員將鑄鐵平板調整至合格精度。
7、鑄鐵平臺使用時要輕拿輕放工件，不要在鑄鐵平板上挪動比較粗糙的工件，以免對鑄鐵平板工作面造成磕碰、劃傷等損壞。

8、為了防止鑄鐵平板整體變形，使用完畢后，要將工件從鑄鐵平板上拿下來，避免工件長時間對鑄鐵平板重壓造成鑄鐵平板的變形。

1. When the cast iron platform is not in use, the working surface should be washed in time, then coated with a layer of anti-rust oil, and covered with anti-rust paper. Cover the cast iron plate with the outer package of the cast iron plate to prevent the cast iron from being inadvertently caused by the cast iron plate. Damage to the flat working surface.
2. The cast iron platform should be installed in a ventilated, dry environment and away from heat sources, corrosive gases, and corrosive liquids.
3. The cast iron platform shall be subject to regular weekly inspection according to national standards. The verification period may be 6-12 months depending on the specific conditions.
4. In order to prevent the deformation of the cast iron plate, when lifting the cast iron plate, four lifting holes on the cast iron plate are used to hang the four cast iron plates at the same time, and the cast iron plate is smoothly hoisted on the transportation tool.
5. The cast iron platform support points are well padded and leveled to ensure uniform force at each support point, ensuring smoothness of the entire cast iron plate.
6. When the cast iron platform is installed, the support points of the cast iron plate are adjusted and lapped with the adjusting horn, and the cast iron plate is adjusted to the qualified precision by professional technicians.
7. When using the cast iron platform, gently handle the workpiece. Do not move the rough workpiece on the cast iron plate to avoid bumping, scratching and other damage to the cast iron plate working surface.

8. In order to prevent the overall deformation of the cast iron plate, after use, the workpiece should be taken off the cast iron plate to avoid deformation of the cast iron plate caused by heavy workpiece pressing on the cast iron plate for a long time.

Company name: botou zhuoyuan mechanical equipment manufacturing co.,LTD
Registered address: jiaohe development zone, botou city, hebei province
Fax number: 0317-8031093
Contact information: 15369812793 (WeChat with the same number)  liansheng chu
Postcode: 062151
Enterprise email:1358827475@qq.com
Account Opening Bank: Botou Branch of Bank of China
Account number: 100399943203
Agricultural bank account number: 6228481739059615270

http://zhuoyuanjixie.com