消失模鑄造平板優勢

時間：2015/12/10 14:54:51 瀏覽量：451 消失模鑄造技術作為一種鑄件近靜形成的方法，近年來得到了快速發展。在國外由于機械化、自動化消失模鑄造生產線的陸續建成投產及所產生的顯著的經濟和社會效益，使消失模鑄造技術顯現出強大的生命力。前一段時間我國的消失模鑄造技術應用雖然進展緩慢，但在近幾年得到了快速發展。特別是由于消失模鑄造設備投資少、工藝路線短，許多原有的中小鑄造企業也越來越多地采用該項技術。但是，有些企業對一些操作問題未能加以重視，使得在生產過程中出現了一些問題，對劃線平臺鑄件的質量產生了很大影響。
消失模鑄造采用負壓干砂振動造型，采用此種方法造型時鑄型強度遠大于濕型砂強度。采用抽負壓方法可提高鑄型的穩定性，及時抽走模樣氣化時產生的熱解氣化產物。但在生產過程中，有些工廠只注意觀察澆注前的表負壓，但澆注過程中往往忽視負壓變化，從而造成鑄件缺陷。通過采取根據鑄件大小和熱解產物的多少，在澆注過程中對負壓進行調節的方法，可很好地解決此問題。

消失模鑄造在澆注時，為了排出氣體和模樣氣化殘渣，直澆道要有足夠的高度以使金屬液有足夠的壓頭以推動金屬液流穩定快速充型，確保鑄件表面完整清晰。在實踐中有些企業采用原有砂型鑄造用的澆口杯，由于尺寸較小，易出現液流不平穩導致工件報廢的現象。為保證有足夠的流量使?jié)沧⑦^程不斷流，并很快建立起動壓頭，可改用較大的澆口杯；直澆道做成中空來減少發氣反噴，增大開始澆注時的壓頭。

Lost foam casting (EPC), as a near-static forming method of castings, has developed rapidly in recent years. In foreign countries, due to the successive completion of mechanized and automated production lines of EPC and the remarkable economic and social benefits, EPC technology has shown strong vitality. In recent years, although the application of lost foam casting technology in China has made slow progress, it has developed rapidly in recent years. Especially because of the low investment in lost foam casting equipment and short technological route, many original small and medium-sized foundry enterprises are increasingly using this technology. However, some enterprises fail to pay attention to some operational problems, which causes some problems in the production process and has a great impact on the quality of the scribed platform castings.
In EPC, negative pressure dry sand is used for vibration moulding. When this method is used for moulding, the strength of the mould is much greater than that of the wet sand. The stability of the casting mould can be improved by suction pressure method, and the pyrolysis gasification products produced during pattern gasification can be removed in time. However, in the production process, some factories only pay attention to the observation of negative pressure before pouring, but in the process of pouring, the change of negative pressure is often neglected, resulting in casting defects. This problem can be well solved by adjusting the negative pressure during pouring according to the size of castings and the number of pyrolysis products.
In EPC, in order to discharge gasification residue of gas and pattern, the straight runner should be high enough to make the liquid metal have enough pressure head to promote the steady and rapid filling of the liquid metal flow, and ensure the complete and clear surface of the casting. In practice, some enterprises adopt the original gate cup for sand mould casting, because of its small size, it is easy to cause the phenomenon of liquid flow instability leading to the scrap of the workpiece. In order to ensure enough flow to make the pouring process flow continuously, and quickly establish the dynamic pressure head, the larger gate cup can be used; the straight runner can be made into hollow to reduce the back gas injection and increase the pressure head at the beginning of pouring.

Company name: botou zhuoyuan mechanical equipment manufacturing co.,LTD
Registered address: jiaohe development zone, botou city, hebei province
Fax number: 0317-8031093
Contact information: 15369812793 (WeChat with the same number)  liansheng chu
Postcode: 062151
Enterprise email:1358827475@qq.com
Account Opening Bank: Botou Branch of Bank of China
Account number: 100399943203
Agricultural bank account number: 6228481739059615270

http://zhuoyuanjixie.com